Offerdetails
MORI SEIKI - NZ 2000 T2Y
MORI SEIKINZ 2000 T2Y
Gallery
Product Info
General Info
| Stock number | 1039-9310 |
| Machine Category | CNC Turning- and Milling Center |
| Make | MORI SEIKI |
| Type | NZ 2000 T2Y |
| Year | 2011 |
| Control | MSX-701 IV |
| Storage location | D-59302 Oelde |
| Country of origin | Japan |
| Delivery time | immediately |
| Quotation | ex site |
| Other information | CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions |
Technical Details
| turning diameter | max. 320 mm |
| turning length | max. 810 mm |
| control | MSX-701 IV |
| greates pass round over bed | 800 mm |
| Swing dia. over traverse guideway | 800 mm |
| distance between spindles | 1.130 mm |
| Main spindle: | |
| power capacity - main spindel | 25 / 22 kW |
| Subspindel: | |
| Number of revolutions | max. 5.000 rpm |
| power capacity - Sub spindle | 25 / 22 kW |
| max. Torque | 358 Nm |
| spindle diameter in front bearing | 120 mm |
| spindle bore | 73 mm |
| max. usable bar diameter | 65 mm |
| spindle nose | JIS A2-6 |
| Turret 1: | |
| Y - Axis | 110 (+65 / -45) mm |
| Turret 2: | |
| number of toolpositions | 16 pos. |
| Number of driven toolspositions | 16 pos. |
| Spindle speed - driven tools | max. 6.000 min -1 |
| power capacity - driven tools | 7,5 / 5,5 kW |
| Shank diameter | 20 x 20 mm |
| Drill shank diameter | 32 mm |
| turret change time | 0,18 sec. |
| axis stroke: | |
| x-travel | 1/2: 210 mm |
| y-travel | 110 mm |
| z-travel | 1/2: 810 mm |
| Traverses Subspindle | B: 870 mm |
| feeds: | |
| rapid traverse ( X / Y / Z ) | 2: 30 / - / 50 m/min |
| Tipp feed | 0 - 5.000 mm/min |
| total power requirement | 94 kVA |
| weight of the machine ca. | 8,3 t |
| dimensions of the machine ca. | 10,0 x 3,0 x 2,5 m |
Accessories
| bar feeder | Master 880 MP 38 LL IEMCA |
| C-axis | |
| Chip conveyor | |
| collet chuck | 2x 160 mm |
| Coolantsystem | |
| div. tool holder | 14 x |
| Documents | |
| live tool holders | 7 x Axial |
| Subspindle | |
| tool setter | |
| triple signal light | |
| Turret | 2x |
| Y-axis |
This information is subject to errors in technical details. The scope of the accessories is understood to be exclusive and within the context of the textual description of the item. There is strictly no claim to any additional accessories - e.g. accessories shown for illustration purposes.
DECKEL MAHODMF 260 New Design
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
MORI SEIKINZ 2000 T2Y
Produkt-Infos
Galerie
Allgemeine Infos
| Lagernummer | 1039-9310 |
| Maschinenart | CNC Turning- and Milling Center |
| Hersteller | MORI SEIKI |
| Type | NZ 2000 T2Y |
| Baujahr | 2011 |
| Steuerung | MSX-701 IV |
| Lagerort | D-59302 Oelde |
| Ursprungsland | Japan |
| Lieferzeit | immediately |
| Frachtbasis | ex site |
| Zusatzinformationen | CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions |
Technische Daten
| turning diameter | max. 320 mm |
| turning length | max. 810 mm |
| control | MSX-701 IV |
| greates pass round over bed | 800 mm |
| Swing dia. over traverse guideway | 800 mm |
| distance between spindles | 1.130 mm |
| Main spindle: | |
| power capacity - main spindel | 25 / 22 kW |
| Subspindel: | |
| Number of revolutions | max. 5.000 rpm |
| power capacity - Sub spindle | 25 / 22 kW |
| max. Torque | 358 Nm |
| spindle diameter in front bearing | 120 mm |
| spindle bore | 73 mm |
| max. usable bar diameter | 65 mm |
| spindle nose | JIS A2-6 |
| Turret 1: | |
| Y - Axis | 110 (+65 / -45) mm |
| Turret 2: | |
| number of toolpositions | 16 pos. |
| Number of driven toolspositions | 16 pos. |
| Spindle speed - driven tools | max. 6.000 min -1 |
| power capacity - driven tools | 7,5 / 5,5 kW |
| Shank diameter | 20 x 20 mm |
| Drill shank diameter | 32 mm |
| turret change time | 0,18 sec. |
| axis stroke: | |
| x-travel | 1/2: 210 mm |
| y-travel | 110 mm |
| z-travel | 1/2: 810 mm |
| Traverses Subspindle | B: 870 mm |
| feeds: | |
| rapid traverse ( X / Y / Z ) | 2: 30 / - / 50 m/min |
| Tipp feed | 0 - 5.000 mm/min |
| total power requirement | 94 kVA |
| weight of the machine ca. | 8,3 t |
| dimensions of the machine ca. | 10,0 x 3,0 x 2,5 m |
Zubehör
| bar feeder | Master 880 MP 38 LL IEMCA |
| C-axis | |
| Chip conveyor | |
| collet chuck | 2x 160 mm |
| Coolantsystem | |
| div. tool holder | 14 x |
| Documents | |
| live tool holders | 7 x Axial |
| Subspindle | |
| tool setter | |
| triple signal light | |
| Turret | 2x |
| Y-axis |
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
Produkt-Infos
Video
Galerie
Allgemeine Infos
| Lagernummer | 1039-9172 |
| Maschinenart | Fahrständerfräsmaschine |
| Hersteller | DECKEL MAHO |
| Type | DMF 260 New Design |
| Baujahr | 2010 |
| Steuerung | iTNC 530 Heidenhain |
| Lagerort | Niedersachsen |
| Ursprungsland | Deutschland |
| Lieferzeit | April 2024 |
| Frachtbasis | ab Standort |
| Zusatzinformationen | CNC - Fahrständerfräsmaschine DECKEL MAHO - DMF 260 New Design - NC-Teilapparat (A-Achse) - Betriebsstunden: 18.709h Spindellauf - Generalüberholte Spindel eingebaut (Dez 2023) - Gewichtsausgleich Z-Achse gewechselt (Feb 2023) - Produktionspaket - Option: Werkzeugspannung für Anzugsbolzen - OHNE Schraubstöcke! |
Technische Daten
| x-Weg | 2.600mm |
| y-Weg | 700mm |
| z-Weg | 700mm |
| Steuerung | iTNC 530 Heidenhain |
| Hauptspindel: | |
| Drehzahlbereich - Hauptspindel | 20 - 18.000min/-1 |
| Antriebsleistung - Hauptspindel | 35 / 25kW |
| Werkzeugaufnahme | SK 40 |
| Arbeitstisch: | |
| Tischaufspannfläche | 2.900 x 700mm |
| max. Tischbelastung | 2.150kg |
| Werkzeugmagazin: | |
| Anzahl der Werkzeugplätze | 30pos. |
| Werkzeugaufnahme | SK 40 |
| max. Werkzeugdurchmesser | 80mm |
| max. Werkzeugdurch. bei freier Nachbarbox. | 130mm |
| max. Werkzeuglänge | 300mm |
| max. Werkzeuggewicht | 6,0kg |
| Vorschübe: | |
| Eilgang ( X / Y / Z ) | 40m/min |
| Vorschubgeschwindigkeit | max. 40.000mm/min |
| Vorschubkraft | max. 8kN |
| Gesamtleistungsbedarf | 54kVA |
| Maschinengewicht ca. | 14,4t |
| Raumbedarf ca. | 8,0 x 5,6 x 2,8m |
Zubehör
| Späneförderer | |
| Kühlmitteleinrichtung | |
| Hochdruckkühlung | 40 bar |
| innere Kühlmittelzufuhr | |
| Rotationssichtscheibe | 2x |
| Signallampe | |
| Papierbandfilter | |
| Interface 4. Achse | |
| Teilapparat | Hofmann - RWNC-220L |
| Werkzeugeinmessung | Blum - LaserControl NT |
| Meßtaster | Heidenhain - TS 649 |
| elektr. Handrad | |
| Automatiktür | |
| Produktionspaket | |
| Rotationssichtscheibe | 2x |
| Spülpistole | |
| Drehdurchführung | |
| Ölnebelabscheider |