Offerdetails
DMG MORI - NLX 2500 SY / 700
DMG MORINLX 2500 SY / 700
Gallery
Product Info
General Info
| Stock number | 1039-9153 |
| Machine Category | CNC Turning- and Milling Center |
| Make | DMG MORI |
| Type | NLX 2500 SY / 700 |
| Year | 2014 |
| Control | M 730 BM MAPPS IV |
| Storage location | |
| Country of origin | - |
| Delivery time | to be agreed |
| Quotation | ex site |
| Other information | CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive |
Technical Details
| turning diameter | max. 366 mm |
| turning length | 705 mm |
| control | M 730 BM MAPPS IV |
| greates pass round over bed | 920 mm |
| Swing dia. over traverse guideway | 742 mm |
| Main spindle: | |
| turning speed range - main spindle | 4.000 min/-1 |
| power capacity - main spindel | 18,5 / 15 kW |
| Subspindel: | |
| Spindle speed range subspindle | 6.000 min/-1 |
| power capacity - Sub spindle | 11 / 7,5 kW |
| spindle nose | JIS A2-5 |
| spindle bearing diameter | 85 mm |
| spindle bore | 43 mm |
| max. usable bar diameter | ( - ) mm |
| chucking diameter | 170 mm |
| axis stroke: | |
| x-travel | 260 mm |
| z-travel | 795 mm |
| Y - Axis | +/-50 mm |
| rapid traverse ( X / Y / Z ) | 30 / 10 / 30 m/min |
| turret: | |
| number of toolpositions | 12 pos. |
| tool taper | BMT 60 |
| Schank height for square tool | 25 mm |
| Drill shank diameter | 50 mm |
| turret change time | 0,27 sec. |
| Driven Tool Positions: | |
| Spindle speed - driven tools | max. 10.000 min -1 |
| power capacity - driven tools | 5,5 / 3,7 kW |
| total power requirement | 40 kVA |
| weight of the machine ca. | 6,4 t |
| dimensions of the machine ca. | 5,0 x 3,0 x 2,3 m |
Accessories
| bar feeder interface | ( LNS ) |
| C-axis | 0,001° |
| Chip conveyor | |
| Coolantsystem | 5 bar |
| Documents | |
| fixed tool-holders | 24x |
| hollow chuck unit | 81 / 45 mm |
| hydraulic system | |
| live tool holders | 6x ax. / 4x rad. |
| parts catcher | |
| Signal-Light | |
| Subspindle | |
| Tailstock function counter spindle | |
| Three Jaw Chuck | BB210 / B206 |
| Tool drive mechanisum | |
| work light | |
| Y-axis |
This information is subject to errors in technical details. The scope of the accessories is understood to be exclusive and within the context of the textual description of the item. There is strictly no claim to any additional accessories - e.g. accessories shown for illustration purposes.
DECKEL MAHODMF 260 New Design
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
DMG MORINLX 2500 SY / 700
Produkt-Infos
Galerie
Allgemeine Infos
| Lagernummer | 1039-9153 |
| Maschinenart | CNC Turning- and Milling Center |
| Hersteller | DMG MORI |
| Type | NLX 2500 SY / 700 |
| Baujahr | 2014 |
| Steuerung | M 730 BM MAPPS IV |
| Lagerort | |
| Ursprungsland | - |
| Lieferzeit | to be agreed |
| Frachtbasis | ex site |
| Zusatzinformationen | CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive |
Technische Daten
| turning diameter | max. 366 mm |
| turning length | 705 mm |
| control | M 730 BM MAPPS IV |
| greates pass round over bed | 920 mm |
| Swing dia. over traverse guideway | 742 mm |
| Main spindle: | |
| turning speed range - main spindle | 4.000 min/-1 |
| power capacity - main spindel | 18,5 / 15 kW |
| Subspindel: | |
| Spindle speed range subspindle | 6.000 min/-1 |
| power capacity - Sub spindle | 11 / 7,5 kW |
| spindle nose | JIS A2-5 |
| spindle bearing diameter | 85 mm |
| spindle bore | 43 mm |
| max. usable bar diameter | ( - ) mm |
| chucking diameter | 170 mm |
| axis stroke: | |
| x-travel | 260 mm |
| z-travel | 795 mm |
| Y - Axis | +/-50 mm |
| rapid traverse ( X / Y / Z ) | 30 / 10 / 30 m/min |
| turret: | |
| number of toolpositions | 12 pos. |
| tool taper | BMT 60 |
| Schank height for square tool | 25 mm |
| Drill shank diameter | 50 mm |
| turret change time | 0,27 sec. |
| Driven Tool Positions: | |
| Spindle speed - driven tools | max. 10.000 min -1 |
| power capacity - driven tools | 5,5 / 3,7 kW |
| total power requirement | 40 kVA |
| weight of the machine ca. | 6,4 t |
| dimensions of the machine ca. | 5,0 x 3,0 x 2,3 m |
Zubehör
| bar feeder interface | ( LNS ) |
| C-axis | 0,001° |
| Chip conveyor | |
| Coolantsystem | 5 bar |
| Documents | |
| fixed tool-holders | 24x |
| hollow chuck unit | 81 / 45 mm |
| hydraulic system | |
| live tool holders | 6x ax. / 4x rad. |
| parts catcher | |
| Signal-Light | |
| Subspindle | |
| Tailstock function counter spindle | |
| Three Jaw Chuck | BB210 / B206 |
| Tool drive mechanisum | |
| work light | |
| Y-axis |
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
Produkt-Infos
Video
Galerie
Allgemeine Infos
| Lagernummer | 1039-9172 |
| Maschinenart | Fahrständerfräsmaschine |
| Hersteller | DECKEL MAHO |
| Type | DMF 260 New Design |
| Baujahr | 2010 |
| Steuerung | iTNC 530 Heidenhain |
| Lagerort | Niedersachsen |
| Ursprungsland | Deutschland |
| Lieferzeit | April 2024 |
| Frachtbasis | ab Standort |
| Zusatzinformationen | CNC - Fahrständerfräsmaschine DECKEL MAHO - DMF 260 New Design - NC-Teilapparat (A-Achse) - Betriebsstunden: 18.709h Spindellauf - Generalüberholte Spindel eingebaut (Dez 2023) - Gewichtsausgleich Z-Achse gewechselt (Feb 2023) - Produktionspaket - Option: Werkzeugspannung für Anzugsbolzen - OHNE Schraubstöcke! |
Technische Daten
| x-Weg | 2.600mm |
| y-Weg | 700mm |
| z-Weg | 700mm |
| Steuerung | iTNC 530 Heidenhain |
| Hauptspindel: | |
| Drehzahlbereich - Hauptspindel | 20 - 18.000min/-1 |
| Antriebsleistung - Hauptspindel | 35 / 25kW |
| Werkzeugaufnahme | SK 40 |
| Arbeitstisch: | |
| Tischaufspannfläche | 2.900 x 700mm |
| max. Tischbelastung | 2.150kg |
| Werkzeugmagazin: | |
| Anzahl der Werkzeugplätze | 30pos. |
| Werkzeugaufnahme | SK 40 |
| max. Werkzeugdurchmesser | 80mm |
| max. Werkzeugdurch. bei freier Nachbarbox. | 130mm |
| max. Werkzeuglänge | 300mm |
| max. Werkzeuggewicht | 6,0kg |
| Vorschübe: | |
| Eilgang ( X / Y / Z ) | 40m/min |
| Vorschubgeschwindigkeit | max. 40.000mm/min |
| Vorschubkraft | max. 8kN |
| Gesamtleistungsbedarf | 54kVA |
| Maschinengewicht ca. | 14,4t |
| Raumbedarf ca. | 8,0 x 5,6 x 2,8m |
Zubehör
| Späneförderer | |
| Kühlmitteleinrichtung | |
| Hochdruckkühlung | 40 bar |
| innere Kühlmittelzufuhr | |
| Rotationssichtscheibe | 2x |
| Signallampe | |
| Papierbandfilter | |
| Interface 4. Achse | |
| Teilapparat | Hofmann - RWNC-220L |
| Werkzeugeinmessung | Blum - LaserControl NT |
| Meßtaster | Heidenhain - TS 649 |
| elektr. Handrad | |
| Automatiktür | |
| Produktionspaket | |
| Rotationssichtscheibe | 2x |
| Spülpistole | |
| Drehdurchführung | |
| Ölnebelabscheider |