Offerdetails
MORI SEIKI - NZ 2000 T3 Y3
MORI SEIKINZ 2000 T3 Y3
Gallery
Product Info
General Info
| Stock number | 1039-9114 |
| Machine Category | CNC Turning- and Milling Center |
| Make | MORI SEIKI |
| Type | NZ 2000 T3 Y3 |
| Year | 2011 |
| Control | MSX 701 IV / MAPPS IV |
| Storage location | D-59302 Oelde |
| Country of origin | Japan |
| Delivery time | to be agreed |
| Quotation | ex site |
| Other information | CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T3 Y3 - Main- and Subspindle - 3 turrets, 2 upper, 1 below - 3 Y-Axis - 3x 16 driven tool stations - extensive accessory package |
Technical Details
| axis stroke: | |
| Bar feed | 65 mm |
| chucking diameter | 210 mm |
| control | MSX 701 IV / MAPPS IV |
| dimensions of the machine ca. | 15,5 x 5,5 x 4,0 m |
| distance between spindles | 1.130 mm |
| Drill shank diameter | 32 mm |
| feeds: | |
| greates pass round over bed | 800 mm |
| Main spindle: | |
| max. Torque | 358 Nm |
| Number of driven toolspositions | 16 pos. |
| Number of revolutions | max. 5.000 min/-1 |
| number of toolpositions | 16 pos. |
| power capacity - driven tool-stations | 7,5 / 5,5 kW |
| power capacity - main spindel | 25 / 22 kW |
| power capacity - Sub spindle | 25 / 22 kW |
| rapid traverse ( X / Y / Z ) | 3: 30 / 20 / 50 m/min |
| Shank diameter | 20 x 20 mm |
| spindle bore | 73 mm |
| spindle diameter in front bearing | 120 mm |
| spindle nose | JIS A2-6 |
| Spindle speed - driven tool stations | max. 6.000 min -1 |
| standard turning dia. | 200 mm |
| Subspindel: | |
| Swing dia. over traverse guideway | 800 mm |
| Tipp feed | 0 - 5.000 mm/min |
| total power requirement | 102 kVA |
| Traverses Subspindle | 920 mm |
| turning diameter | max. 320 mm |
| turning length | max. 810 mm |
| Turret 1: | |
| Turret 2: | |
| Turret 3: | |
| turret change time | 0,18 sec. |
| weight of the machine ca. | 9,5 t |
| x-travel | 1/2/3: 210 mm |
| Y - Axis | 110 (+45 / -65) mm |
| Y - Travel | 110 (+65 / -45) mm |
| y-travel | 1/2/3: 110 mm |
| z-travel | 3: 300 (+100) mm |
Accessories
| C-axis | |
| Chip conveyor | |
| Coolantsystem | |
| Documents | |
| driven tools | |
| exhaust fan | ELBARON - EBR 5000 D |
| gantry loader | Promot EPL20 NC |
| high pressure coolant | Knoll KF200/1400 70 bar |
| paper band filter | |
| steady rest | SMW - SLU-1Z (on Turret |
| Subspindle | |
| tool holders | |
| tool setter | 2x |
| triple signal light | |
| Turret | 3x |
| Y-axis |
This information is subject to errors in technical details. The scope of the accessories is understood to be exclusive and within the context of the textual description of the item. There is strictly no claim to any additional accessories - e.g. accessories shown for illustration purposes.
DECKEL MAHODMF 260 New Design
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
MORI SEIKINZ 2000 T3 Y3
Produkt-Infos
Galerie
Allgemeine Infos
| Lagernummer | 1039-9114 |
| Maschinenart | CNC Turning- and Milling Center |
| Hersteller | MORI SEIKI |
| Type | NZ 2000 T3 Y3 |
| Baujahr | 2011 |
| Steuerung | MSX 701 IV / MAPPS IV |
| Lagerort | D-59302 Oelde |
| Ursprungsland | Japan |
| Lieferzeit | to be agreed |
| Frachtbasis | ex site |
| Zusatzinformationen | CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T3 Y3 - Main- and Subspindle - 3 turrets, 2 upper, 1 below - 3 Y-Axis - 3x 16 driven tool stations - extensive accessory package |
Technische Daten
| axis stroke: | |
| Bar feed | 65 mm |
| chucking diameter | 210 mm |
| control | MSX 701 IV / MAPPS IV |
| dimensions of the machine ca. | 15,5 x 5,5 x 4,0 m |
| distance between spindles | 1.130 mm |
| Drill shank diameter | 32 mm |
| feeds: | |
| greates pass round over bed | 800 mm |
| Main spindle: | |
| max. Torque | 358 Nm |
| Number of driven toolspositions | 16 pos. |
| Number of revolutions | max. 5.000 min/-1 |
| number of toolpositions | 16 pos. |
| power capacity - driven tool-stations | 7,5 / 5,5 kW |
| power capacity - main spindel | 25 / 22 kW |
| power capacity - Sub spindle | 25 / 22 kW |
| rapid traverse ( X / Y / Z ) | 3: 30 / 20 / 50 m/min |
| Shank diameter | 20 x 20 mm |
| spindle bore | 73 mm |
| spindle diameter in front bearing | 120 mm |
| spindle nose | JIS A2-6 |
| Spindle speed - driven tool stations | max. 6.000 min -1 |
| standard turning dia. | 200 mm |
| Subspindel: | |
| Swing dia. over traverse guideway | 800 mm |
| Tipp feed | 0 - 5.000 mm/min |
| total power requirement | 102 kVA |
| Traverses Subspindle | 920 mm |
| turning diameter | max. 320 mm |
| turning length | max. 810 mm |
| Turret 1: | |
| Turret 2: | |
| Turret 3: | |
| turret change time | 0,18 sec. |
| weight of the machine ca. | 9,5 t |
| x-travel | 1/2/3: 210 mm |
| Y - Axis | 110 (+45 / -65) mm |
| Y - Travel | 110 (+65 / -45) mm |
| y-travel | 1/2/3: 110 mm |
| z-travel | 3: 300 (+100) mm |
Zubehör
| C-axis | |
| Chip conveyor | |
| Coolantsystem | |
| Documents | |
| driven tools | |
| exhaust fan | ELBARON - EBR 5000 D |
| gantry loader | Promot EPL20 NC |
| high pressure coolant | Knoll KF200/1400 70 bar |
| paper band filter | |
| steady rest | SMW - SLU-1Z (on Turret |
| Subspindle | |
| tool holders | |
| tool setter | 2x |
| triple signal light | |
| Turret | 3x |
| Y-axis |
Highlights
- 2-fach Palettenwechsler
- 60 Werkzeugplätze
- Werkzeugbruchkontrolle
- Baujahr: 2011
Produkt-Infos
Video
Galerie
Allgemeine Infos
| Lagernummer | 1039-9172 |
| Maschinenart | Fahrständerfräsmaschine |
| Hersteller | DECKEL MAHO |
| Type | DMF 260 New Design |
| Baujahr | 2010 |
| Steuerung | iTNC 530 Heidenhain |
| Lagerort | Niedersachsen |
| Ursprungsland | Deutschland |
| Lieferzeit | April 2024 |
| Frachtbasis | ab Standort |
| Zusatzinformationen | CNC - Fahrständerfräsmaschine DECKEL MAHO - DMF 260 New Design - NC-Teilapparat (A-Achse) - Betriebsstunden: 18.709h Spindellauf - Generalüberholte Spindel eingebaut (Dez 2023) - Gewichtsausgleich Z-Achse gewechselt (Feb 2023) - Produktionspaket - Option: Werkzeugspannung für Anzugsbolzen - OHNE Schraubstöcke! |
Technische Daten
| x-Weg | 2.600mm |
| y-Weg | 700mm |
| z-Weg | 700mm |
| Steuerung | iTNC 530 Heidenhain |
| Hauptspindel: | |
| Drehzahlbereich - Hauptspindel | 20 - 18.000min/-1 |
| Antriebsleistung - Hauptspindel | 35 / 25kW |
| Werkzeugaufnahme | SK 40 |
| Arbeitstisch: | |
| Tischaufspannfläche | 2.900 x 700mm |
| max. Tischbelastung | 2.150kg |
| Werkzeugmagazin: | |
| Anzahl der Werkzeugplätze | 30pos. |
| Werkzeugaufnahme | SK 40 |
| max. Werkzeugdurchmesser | 80mm |
| max. Werkzeugdurch. bei freier Nachbarbox. | 130mm |
| max. Werkzeuglänge | 300mm |
| max. Werkzeuggewicht | 6,0kg |
| Vorschübe: | |
| Eilgang ( X / Y / Z ) | 40m/min |
| Vorschubgeschwindigkeit | max. 40.000mm/min |
| Vorschubkraft | max. 8kN |
| Gesamtleistungsbedarf | 54kVA |
| Maschinengewicht ca. | 14,4t |
| Raumbedarf ca. | 8,0 x 5,6 x 2,8m |
Zubehör
| Späneförderer | |
| Kühlmitteleinrichtung | |
| Hochdruckkühlung | 40 bar |
| innere Kühlmittelzufuhr | |
| Rotationssichtscheibe | 2x |
| Signallampe | |
| Papierbandfilter | |
| Interface 4. Achse | |
| Teilapparat | Hofmann - RWNC-220L |
| Werkzeugeinmessung | Blum - LaserControl NT |
| Meßtaster | Heidenhain - TS 649 |
| elektr. Handrad | |
| Automatiktür | |
| Produktionspaket | |
| Rotationssichtscheibe | 2x |
| Spülpistole | |
| Drehdurchführung | |
| Ölnebelabscheider |