Stock number | 1039-9063 |
Machine Category | CNC Turning- and Milling Center |
Make | OKUMA |
Type | SpaceTurn LB 300 MC / 1000 |
Year | 2005 |
Control | OSP E 100 L |
Storage location | |
Country of origin | Japan |
Delivery time | immediately |
Quotation | ex site |
Other information | CNC-Turning- and Millingcenter
OKUMA - SpaceTurn LB 300 MC / 1000 - Tool-Drive - C-Axis - Without driven toolholders shown on pictures ! |
axis stroke: | |
C - Axis | 0,001 ° |
chucking diameter | 250 mm |
control | OSP E 100 L |
diameter of quill | 90 mm |
dimensions of the machine ca. | 6,0 x 3,0 x 2,5 m |
distance between spindles | 1.020 mm |
Drill shank diameter | 40 mm |
feed speeds | 0,001 - 1.000.000 mm/min |
feeds: | |
greates pass round over bed | 530 mm |
Main spindle: | |
max. usable bar diameter | 70 mm |
Number of driven toolspositions | 12 pos. |
number of toolpositions | 12 pos. |
power capacity - driven tool-stations | 5,5 / 3,3 kW |
power capacity - main spindel | 22 / 15 kW |
quill stroke | 120 mm |
rapid traverse ( X / Y / Z ) | 20 / 10 / 25 m/min |
rapid traverse C-axis | 200 min/-1 |
Shank diameter | 25 mm |
spindle bearing diameter | 120 mm |
spindle nose | JIS A2-8 |
Spindle speed - driven tool stations | 45 - 4.500 min -1 |
Swing dia. over traverse guideway | 420 mm |
Tailstock: | |
taper of center | MT 5 |
tool taper | VDI 40 |
total power requirement | 25 kVA |
transmission ratio | 1 |
turning diameter | 340 mm |
turning length | 1.000 mm |
turning speed range - main spindle | 38 - 3.800 min/-1 |
turret: | |
weight of the machine ca. | 7,9 t |
x-axis | 260 (185 + 75) mm |
z-axis | 1.020 mm |
C-axis | 360 x 0,001° |
Chip conveyor | |
Coolantsystem | |
Documents | |
fixed tool-holders | 10x |
hydraulic system | |
Jaws | |
Signal-Light | |
Tailstock | |
Three Jaw Chuck | SMW AutoBlok |
Turret |
This information is subject to errors in technical details. The scope of the accessories is understood to be exclusive and within the context of the textual description of the item. There is strictly no claim to any additional accessories - e.g. accessories shown for illustration purposes.
Lagernummer | 1039-9063 |
Maschinenart | CNC Turning- and Milling Center |
Hersteller | OKUMA |
Type | SpaceTurn LB 300 MC / 1000 |
Baujahr | 2005 |
Steuerung | OSP E 100 L |
Lagerort | |
Ursprungsland | Japan |
Lieferzeit | immediately |
Frachtbasis | ex site |
Zusatzinformationen | CNC-Turning- and Millingcenter
OKUMA - SpaceTurn LB 300 MC / 1000 - Tool-Drive - C-Axis - Without driven toolholders shown on pictures ! |
axis stroke: | |
C - Axis | 0,001 ° |
chucking diameter | 250 mm |
control | OSP E 100 L |
diameter of quill | 90 mm |
dimensions of the machine ca. | 6,0 x 3,0 x 2,5 m |
distance between spindles | 1.020 mm |
Drill shank diameter | 40 mm |
feed speeds | 0,001 - 1.000.000 mm/min |
feeds: | |
greates pass round over bed | 530 mm |
Main spindle: | |
max. usable bar diameter | 70 mm |
Number of driven toolspositions | 12 pos. |
number of toolpositions | 12 pos. |
power capacity - driven tool-stations | 5,5 / 3,3 kW |
power capacity - main spindel | 22 / 15 kW |
quill stroke | 120 mm |
rapid traverse ( X / Y / Z ) | 20 / 10 / 25 m/min |
rapid traverse C-axis | 200 min/-1 |
Shank diameter | 25 mm |
spindle bearing diameter | 120 mm |
spindle nose | JIS A2-8 |
Spindle speed - driven tool stations | 45 - 4.500 min -1 |
Swing dia. over traverse guideway | 420 mm |
Tailstock: | |
taper of center | MT 5 |
tool taper | VDI 40 |
total power requirement | 25 kVA |
transmission ratio | 1 |
turning diameter | 340 mm |
turning length | 1.000 mm |
turning speed range - main spindle | 38 - 3.800 min/-1 |
turret: | |
weight of the machine ca. | 7,9 t |
x-axis | 260 (185 + 75) mm |
z-axis | 1.020 mm |
C-axis | 360 x 0,001° |
Chip conveyor | |
Coolantsystem | |
Documents | |
fixed tool-holders | 10x |
hydraulic system | |
Jaws | |
Signal-Light | |
Tailstock | |
Three Jaw Chuck | SMW AutoBlok |
Turret |
Lagernummer | 1039-9172 |
Maschinenart | Fahrständerfräsmaschine |
Hersteller | DECKEL MAHO |
Type | DMF 260 New Design |
Baujahr | 2010 |
Steuerung | iTNC 530 Heidenhain |
Lagerort | Niedersachsen |
Ursprungsland | Deutschland |
Lieferzeit | April 2024 |
Frachtbasis | ab Standort |
Zusatzinformationen | CNC - Fahrständerfräsmaschine DECKEL MAHO - DMF 260 New Design - NC-Teilapparat (A-Achse) - Betriebsstunden: 18.709h Spindellauf - Generalüberholte Spindel eingebaut (Dez 2023) - Gewichtsausgleich Z-Achse gewechselt (Feb 2023) - Produktionspaket - Option: Werkzeugspannung für Anzugsbolzen - OHNE Schraubstöcke! |
x-Weg | 2.600mm |
y-Weg | 700mm |
z-Weg | 700mm |
Steuerung | iTNC 530 Heidenhain |
Hauptspindel: | |
Drehzahlbereich - Hauptspindel | 20 - 18.000min/-1 |
Antriebsleistung - Hauptspindel | 35 / 25kW |
Werkzeugaufnahme | SK 40 |
Arbeitstisch: | |
Tischaufspannfläche | 2.900 x 700mm |
max. Tischbelastung | 2.150kg |
Werkzeugmagazin: | |
Anzahl der Werkzeugplätze | 30pos. |
Werkzeugaufnahme | SK 40 |
max. Werkzeugdurchmesser | 80mm |
max. Werkzeugdurch. bei freier Nachbarbox. | 130mm |
max. Werkzeuglänge | 300mm |
max. Werkzeuggewicht | 6,0kg |
Vorschübe: | |
Eilgang ( X / Y / Z ) | 40m/min |
Vorschubgeschwindigkeit | max. 40.000mm/min |
Vorschubkraft | max. 8kN |
Gesamtleistungsbedarf | 54kVA |
Maschinengewicht ca. | 14,4t |
Raumbedarf ca. | 8,0 x 5,6 x 2,8m |
Späneförderer | |
Kühlmitteleinrichtung | |
Hochdruckkühlung | 40 bar |
innere Kühlmittelzufuhr | |
Rotationssichtscheibe | 2x |
Signallampe | |
Papierbandfilter | |
Interface 4. Achse | |
Teilapparat | Hofmann - RWNC-220L |
Werkzeugeinmessung | Blum - LaserControl NT |
Meßtaster | Heidenhain - TS 649 |
elektr. Handrad | |
Automatiktür | |
Produktionspaket | |
Rotationssichtscheibe | 2x |
Spülpistole | |
Drehdurchführung | |
Ölnebelabscheider |
We show YouTube videos on our website. When playing the videos, YouTube sets a cookie that collects information about the user behaviour. In connection with the use of YouTube videos, personal data relating to user activities are collected by the respective service provider and transferred to the USA, whereby there is currently no adequacy decision by the EU Commission and there are also no other suitable guarantees for secure data transfer, so that such a transfer would be associated with risks. The data could be exposed to access by US authorities, including security authorities, in the event of transfer.
Our website uses the live chat tool PURE CHAT. This software allows you, as a customer, to quickly get in touch with us.
Protects against cross-site request forgery attacks.
Saves the current PHP session.